Persisting in “High quality, Prompt Delivery, Aggressive Price”, now we have established long-term cooperation with consumers from equally overseas and domestically and get new and old clients’ large comments for Hot sale Factory China BHS Supplies a Full Set of Wear Resistant Aaphalt Mixing Blade Mixing Arms and Mixing Liners, The main goal of our company is to live a satisfactory memory to all the customers, and establish a long term business relationship with buyers and users all over the world.
Persisting in “High quality, Prompt Delivery, Aggressive Price”, now we have established long-term cooperation with consumers from equally overseas and domestically and get new and old clients’ large comments for China Concrete Mixer Parts, Mixer Crusher Parts, Immediate and expert after-sale service supplied by our consultant group has happy our buyers. Detailed Info and parameters from the merchandise will probably be sent to you for any extensive acknowledge. Free samples may be delivered and company check out to our corporation. n Morocco for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.
Product Advantages
Consistently high mixture homogeneity and short mixing cycles
● Rapid increase in mixture homogeneity through intensive material exchange
● Uniform consistency and homogeneity in every mixing cycle
Optimum energy efficiency
● Excellent mixing performance despite low mixer speed
● Preservation of the grain structure of the formulation’s individual components
● Low specific energy consumption due to short mixing times, optimized mixing mechanism and efficient drive
Design results in low wear
● Low wear on mixing tools and mixing trough lining due to low speeds and compact design
● Significantly less wear and tear than with pan or planetary mixers
● Optimized design of all parts subject to wear
Efficient production of concrete
● Excellent liberation of binders in a short time
● Creates potential for reducing the required amount of binder
● Uniform and fast distribution of additives and admixtures across the entire volume of the mixture
● Possibility of small batches as low as 10% of the nominal filling level
● Safe investment in view of modern concrete formulations
● Supports hybrid mixing cycles (slow – fast – slow)
| Type | Dry charge,
aggregates and binder |
Compacted
concrete per batch |
Compacted concrete output | Drive system
(ready-mixed concrete) 3) |
Maximum aggregate sizes | ||||
| with truck mixer
discharge 1) |
with open truck
discharge 2) |
Ready-mixed
concrete |
Hydrodam
concrete 4) |
||||||
| DKX 1.00 | 2 yd³ 1.5 m³ |
1.3 yd³ 1 m³ | 58 cycles/h | 76 yd³/h 58 m³/h |
60 cycles/h | 78 yd³/h 60 m³/h |
50 hp 37 kW |
2½ in 64 mm | 3 in 80 mm |
| DKX 1.25 | 2.5 yd³ 1.88 m³ |
1.6 yd³ 1.25 m³ |
53 cycles/h | 86 yd³/h 66 m³/h |
53 cycles/h | 86 yd³/h 66 m³/h |
60 hp 45 kW |
2½ in 64 mm | 5 in 125 mm |
| DKX 2.25 | 4.5 yd³ 3.38 m³ |
3 yd³ 2.25 m³ |
46 cycles/h | 136 yd³/h 104 m³/h |
50 cycles/h | 148 yd³/h 113 m³/h |
100 hp 75 kW |
2½ in 64 mm | 6 in 150 mm |
| DKX 3.00 | 6 yd³ 4.5 m³ |
4 yd³ 3 m³ |
44 cycles/h | 173 yd³/h 132 m³/h |
53 cycles/h | 208 yd³/h 159 m³/h |
2 x 75 hp 2 x 55 kW |
2½ in 64 mm | 6 in 150 mm |
| DKX 4.00 | 7.9 yd³ 6 m³ | 5.2 yd³ 4 m³ | 39 cycles/h | 204 yd³/h 156 m³/h |
49 cycles/h | 256 yd³/h 196 m³/h |
2 x 100 hp 2 x 75 kW |
2½ in 64 mm | 6¼ in 160 mm |
| DKX 4.50 | 9 yd³ 6.75 m³ |
6 yd³ 4.5 m³ |
37 cycles/h | 218 yd³/h 167 m³/h |
51 cycles/h | 301 yd³/h 230 m³/h |
2 x 100 hp 2 x 75 kW |
2½ in 64 mm | 6¼ in 160 mm |
Advantage Of The Three-Fimensional Mixing Concep
In contrast to the circular motion of other mixing systems, the three-dimensional mixing principle of the twin-shaft batch mixer produces a more intensive exchange of material, which leads to shorter mixing times while consuming less energy.
Spiral mixing tools
● Mixing tools arranged on each mixing shaft in the shape of an interrupted spiral
● Two counter-rotating mixing shafts with the mixing tools overlapping in the longitudinal center of the mixer
● Counter blades positioned at the ends of the shafts
● Moderate circumferential speed of the mixing blades for gentle processing
● High-quality hexagonal shaft with high torsional and bending strength
● Streamlined mixing arms made of special cast steel
● Helical arrangement of the mixing arms as spiral mixer
● Easily adjustable mixer blades
Mixing principle
● Generation of a circular three-dimensional movement pattern of the entire mixture
● Intensive material exchange in the turbulent overlap zone of the two mixing circuits
● Optimal conversion of the energy input into intensive relative movements of the mixture
● Total volume of material is always included in the mixing process
Mixer Configuration
Mixing mechanisms
Universal mixing unit
This features a 60° arm inclination for the production of ready-mixed concrete, precast concrete, special concretes and many other mixing materials.
Smooth mixing tools
This serves to reduce adhesions to a minimum, even when processing sticky mixtures.
Coarse particle mixing system
For the production of concrete used in dam construction, this system is suitable for aggregates up to 180 mm, depending on mixer size.
Twin mixing mechanism
For the production of dry and moist mixtures with many fine particles. This doubling of the mixing arms significantly increases the number of relative movements in the mixture, resulting in shorter mixing cycles
Wear lining
Diamond-shaped tiles
Diamond-shaped tiles with a material thickness of 19 mm made from optimized chrome chilled cast alloy can be used as mixing trough lining. The service life improves by up to 30 % compared to rectangular tiles.
OPTILONG tiles
We offer rhombus-shaped tiles with a material thickness of 28 mm for high-wear applications. The variable hardness of the individual tile rows ensures uniform abrasion across all wear zones. This nearly doubles the service life compared to the 19-mm rhombic tiles.
Discharge gate design features
● Solid and robust cast construction
● Centrally located between the two mixing shafts
● Effective sealing due to adjustable gate rails
● Precise regulation of the discharge volume
● Reliable actuation using pneumatic or hydraulic cylinders
Wear lining
Impulse-driven central lubrication
The impulse-driven central lubrication system supplies the internal axial face seals with grease. After mixer cleaning or when required, lubrication of the seals can be triggered via the control unit at the push of a button. The running time is freely adjustable.
Fully automatic central lubrication
The lubrication points of the four axial face seals, the four internal mixer trough seals (and, as an option, the other lubrication points of the mixer) are automatically supplied with grease via a PLC controller and by means of a progressive distributor. To lubricate the system after mixer cleaning, it is sufficient to trigger the grease pump via the PLC control.
Delivery Photo
Persisting in “High quality, Prompt Delivery, Aggressive Price”, now we have established long-term cooperation with consumers from equally overseas and domestically and get new and old clients’ large comments for Hot sale Factory China BHS Supplies a Full Set of Wear Resistant concrete mixer Blade Mixing Arms and Mixing Liners, The main goal of our company is to live a satisfactory memory to all the customers, and establish a long term business relationship with buyers and users all over the world.
Hot sale Factory China Concrete Mixer Parts, Mixer Crusher Parts, Immediate and expert after-sale service supplied by our consultant group has happy our buyers. Detailed Info and parameters from the merchandise will probably be sent to you for any extensive acknowledge. Hope to get inquiries type you and construct a long-term co-operation partnership.
